CONSTRUCTION High efficiency backward curved blade impeller in galvanized steel sheet. Balancing according to UNI ISO 21940-11. Installation base with inlet cone in metal sheet protected against the atmospheric agents. Outer protection guard in steel rod protected against the  atmospheric agents. Motor cap in steel sheet protected...

- Zone 1/21 -Nominal voltage: 450/750V AC -Tested voltage: 2.5kV -Temperature resistant: -60°C +260°C -Braiding resistance: <18.2 Ohm/km -My Inst. Temperature: -60°C -Min Bending radius: 25 mm for Ø >8 mm 15 mm for Ø ≤8 mm -Max Mechanical load: 4J tested ≥ 7.2 Ohm/km 7J tested < 4.4 Ohm/km

Fans aprroved for Zone 1/21 or Zone 2/22 Inlet size: 250 up to 1100 mm Capability: air flow up to 15 m3/s, static pressure ∆pstat to 9000 Pa Motor IEC frame size: 63 up to 315 Surface treatment: primer and paint finish, or hot-dip  galvanized - on request Materials: fan made of steel, inlet made of steel or...

Zone 1/21 Temperature range: from -20°C to +500°C Compact design 16A / 230V switching capacity Cross section 4 / 6mm² 4 / 6mm sensor diameter Resistant to chemical influences 

Ex d e fire alarm station in GRP (glass‑reinforced polyester) Two functions: automatic or manual IP65–66 enclosure rating Certified for IIC (gas) and IIIC (dust) Temperature class: T6 to T4 Dust temperature: T85–135 °C II 2 GD – Ex d e IIC T6–T4 Gb / Ex tb IIIC T85–135 °C Db

Volt - From 24V to 48V both AC and DC both 2p and 3p connectors Watts - 35W Light sources - 81 LEDs, 5000°K Lumen - 4100 Composition - Throughout antistatique polypropylene, metal frame, stainless steel bolts. Lens...

TECHNICAL SPECIFICATIONS DUCT- M (ATEX version)  Conveyed fluid: clean gas, not abrasive or corrosive.  Temperature conveyed fluid: -20°C / +40°C.  Voltage: three phase version (T) 400V-3Ph. Single phase version (M) 230V-1Ph.  Frequency: 50Hz.  Air flow from motor to impeller, position A (FMG).

Approved for Zone 1/21 We deliver handheld controls on request Contact us for more information or a quote

Zone 1/21 Temperature resistant up to 425°C Can be cut to length without wastage Outputs available up to 150W/m Full range of controls, accessories and approvals Available for 220..277V AC 110..120V AC upon request

Zone 1/21 Enclosures made of PA glass fiber reinforced polyamide <span...

13 MP rear camera with LED flash  5 MP front camera ATEX/IECEx Zone 1/21 and Zone 2/22 Ex marking: II 2G Ex ib IIC T4 Gb / II 2D Ex ib IIIC T135°C Db NEC Class I, II, III – Division 1 and 2 Android 15 (kiosk mode – camera only) Video recording: 1080p / 720p / 480p Internal storage 128 GB ...

 Supporting frame in antistatic plastic material or in steel sheet with or without aluminum stripe around the impeller rotation area. Inlet protection grid, with function of motor support, in steel rod manufactured in accordance with UNI EN 294. <span lang="en-us"...

Compact combined 100 dB (A) alarm sound and LED lighthouse. Only a Zener barrier or galvanic isolator is required to run both sonar and signal light or alternatively the unit can be used as individual signals. Approved for Zone 0/20 LED colors: red, amber, blue, green and clear 16-28vdc via Zener barrier or galvanic...

Zone 1/21 Enclosures made of PA glass fiber reinforced polyamide The cover screws and all other external...

Ex d enclosures in painted carbon steel or stainless steel Certified for IIC – the highest gas group (most demanding environments) Can be used as Ex d direct entry or as an Ex de combination Delivered empty (U‑certificate) or fully equipped Possibility to mount multiple enclosures on a frame together with Ex e/i junction...

ATEX/IECEx Zone 1 certified Intrinsically safe design High‑resolution hands‑free display Wi‑Fi 6/6E and future 5G support AI‑powered processor for advanced workflows Modular accessory system incl. thermal camera Rugged, drop‑tested and temperature‑resistant Voice control with strong noise...

Zone 21, 2, 22 Explosion‑protected floodlight with LED modules, equipped with a built‑in battery (3 hours) for emergency lighting. Designed to operate in zones 21, 2 and 22 with explosion risks from gases, vapours and mists of flammable liquids, as well as from combustible dust and fibres. The housing is made of aluminium, and...

Approved for Zone 1/21  Dimension:  225 x 82 x 69mm Voltage: 230V Power output: 65W at 5°C Temperature class: T4 Protection class: IP 65 Temperature range: - 55°C up to +85°C

Approved for Zone 1/21 Explosion-proof and dustproof linear LED lighting Length 750mm SMC polyester plastic reinforced with fiberglass, color RAL 7038 4000K 5 year warranty Supplied with socket wrench, two Ex cable glands M25, two Ex blind plugs M25 and ceiling bracket in nickel-plated brass. ...

Zone 21, 2/22 &gt;70 000 hours L80B10 Ambient temperature -40°C till +45°C IP 66, IP 67 230V, 0/50-60Hz Certificate: ATEX, IECEx

Approved for Zone 1/21  Dimension:  630 x 300 x 40mm Voltage: 230V Power output: 500W at 5°C Temperature class: T4 Protection class: IP 65 Temperature range: - 55°C up to +85°C

Zone 1 Connection between flameproof enclosures or between flameproof enclosure and enclosure with another type of protection Rated voltage Uo / U: 400/1000 V AC Rated cross-section 1,5 - 50 mm2 Contact us directly for more information, a quote or questions.

- Zone 1/21 - Housing: aluminium powder painted casting - Diffuser: borosilicate glass, silicone gasket - Protected grid: AISI 316 - Standard version without protected grid On request - Protection grid - 110 V AC/DC - 48 V AC/DC

ATEX‑certified for Zone 1 &amp; Zone 2 (gas) and Zone 21 &amp; Zone 22 (dust) Complies with II 2GD requirements for explosive...

Approved for Zone 1/21  Dimension:  1030 x 420 x 40mm Voltage: 230V Power output: 1000W at 5°C Temperature class: T4 Protection class: IP 65 Temperature range: - 55°C up to +85°C

Zone 1/21 Ex classified emergency stop box Interlocked, reset by pulling out the emergency pressure again Cable gland M25 for cable 6-15 mm

ATEX designation: Ex eb, Ex db, Ex nR, Ex ta Suitable for unarmoured and braid‑armoured cables Flameproof displacement‑type sealing system Deluge‑protected design Temperature range: –60 °C to +130 °C Globally approved: ATEX, IECEx, CSA Available in sizes M16–M130 Robust construction for harsh...

Zone 1/21 Voltage: 250V AC     Switching contact: 1 NC 16A / 250V AC Switching temperature: 4°C On / 11°C Off (other swichting points s. operation manual) Power cable: 400mm 3G1,5mm²  Cable glands: M20x1,5 Messing vernickelt

Approved for Zone 1/21 Explosion-proof and dustproof linear LED lighting Length 1370mm SMC polyester plastic reinforced with fiberglass, color RAL 7038 4000K 5 year warranty Supplied with socket wrench, two Ex cable glands M25, two Ex blind plugs M25 and ceiling bracket in nickel-plated brass. ...

ATEX option: Ex e certification available for hazardous areas Fully fire‑tested to: – IEC60331‑2 (830 °C for 3 h) – BS8434‑2 (970 °C for 2 h) – IEC331 (750 °C for 3 h) Protection rating IP66/IP67 Glass‑fibre reinforced polyester, halogen‑free Operating temperature –55 °C to +65 °C (with correct gasket) Multiple enclosure sizes...

Ex control unit  Zone 1/21 2x pushbuttons and emergency STOP mushroom 1x M25 plastic CG at bottom side for cable 6-15mm <span lang="en-us" style="color:#1f497d;"...

Zone 1/21 Pushbutton box / control box Approved for Zone 1/21 2x pushbuttons (start, stop) PBT 01 - SPO 01/1 - SPO 01/2, 2x signal lamps SLP - 02/1 - SPO 02/2, 2x cable glands SPU 25 IP 66 IK 08 We supply various combinations of control boxes. Also customized solutions. Please see our data sheet...