Product Overview
Type: Traditional Rotating Beacon (ROTALLARM)
Light Source: Incandescent bulb or halogen lamp (H1)
Light Effect: Rotating light with a rotation speed of 160 ±30 revolutions per minute
Luminous Intensity: Up to 4500...
World's Fastest Online Shopping Destination
World's Fastest Online Shopping Destination
View Left Column
Filter
17 products
Grid
Grid-2
List
List-2
Catelog
Filter
Zone 1/21
Housing: SMC polyester plastic reinforced with glass fiber, color RAL 7038
Diffuser: PC polycarbonate plastic
Gasket: silicone
28W, 3820 lm
Central locking: can be opened/closed using a socket key SW8, hinged lamp cover
The light fitting is normally supplied with socket key, two Ex e cable...
- Zone 1/21
- Housing: aluminium powder painted casting
- Diffuser: borosilicate glass, silicone gasket
- Protected grid: AISI 316
- Standard version without protected grid
On request
- Protection grid
- 110 V AC/DC
- 48 V AC/DC
Home
Mini-Led 6J Ex
Low power consumption and virtually unlimited lifespan.
Silicone O-ring for IP66-rated mechanical sealing.
Direct connection to lamp holder: L, N, PE (max cable cross-section: 4 mm²).
Housing made of low-copper aluminum alloy.
Stainless steel screws.
Impact-resistant borosilicate glass, heat-resistant, enclosed...
Zone 1/21
Housing: SMC polyester plastic reinforced with glass fiber, color RAL 7038
Diffuser: PC polycarbonate plastic
Gasket: silicone
56 W, 7645 lm
Central locking: can be opened/closed using a socket key SW8, hinged lamp cover
The light fitting is normally supplied with socket key, two Ex e cable...
Zone 1/21
Used for marking escape routes and exits in potentially explosive atmos[1]pheres
Self-test, monitor[1]ing and diagnostics reduce costly maintenance checks
3h autonomy
Maintained / Non maintained opera[1]tion
DALI Digital Ad[1]dressable Lighting Interface
3 lithium-ion sec[1]ondary cells...
ATEX classification:
II 3G Ex nR IIC T6 Gc – approved for Zone 2 (gas)
II 3D Ex tc IIIC T70°C Dc – approved for Zone 22 (dust)
Certifications: CE, UKEX, ATEX
Protection rating: IP66, IK10
Lifetime: 50,000 hours (L80/B20)
Temperature range: +5°C to +50°C
Materials: Grey polycarbonate (UV-stable), steel...
Zone 1/21
Low weight/3,5 kg
Up to 70W HSE (5900lm)
IP 66
230V ±10% AC, FLASH 24V, 110V, 230V
Protected galvanized steel gird, assembly set for wall, pipe and ceiling mountinge.
On request
Protected galvanized steel gird INOX
Zone 1, 2, 21 and 22
Explosion‑proof LED emergency luminaire.
Designed for use in Zones 1, 21 and 2, 22 where there is a risk of gases and vapors from flammable liquids, as well as combustible dusts and fibers.
The housing is made of GRP.
The cover is made of PMMA or UV‑resistant polycarbonate.
Equipped with an...
Zon 1/21
Life time up till 100000 h
Steady/flashing funtions
IP 66
24 VAC/DC, 110-120 VAC. 230-240 VAC
Zone 1, 2, 21 and 22
Explosion‑proof LED emergency luminaire. Designed for operation in Zones 1, 21 and 2, 22 with explosion hazards from gases, vapors and mists of flammable liquids, as well as combustible dusts and fibers.
The housing is made of aluminum and the cover is made of UV‑resistant polycarbonate or tempered glass. ...
Certified II 2GD Ex db op is IIC T6 Gb
Certified Ex tb op is IIIC T… Db
Available in 2700K warm colour temperature
Impact‑resistant borosilicate glass
Low‑copper aluminium heads for corrosion resistance
High‑efficiency aluminium reflector
Round design reduces dust build‑up
Suitable for oil...
Explosion‑protected LED luminaire.
Designed for use in zones 21 & 2, 22 with gases and vapours from flammable liquids, as well as hazardous areas with combustible dust and fibres.
Housing made of GRP.
Diffuser made of UV‑resistant polycarbonate.
Also available as an emergency version with built‑in battery or for...
Explosion‑protected LED luminaire.
Designed for use in zones 21 & 2, 22 with gases and vapours from flammable liquids, as well as combustible dust and fibres in hazardous areas.
The housing is made of powder‑coated stainless steel.
The diffuser is made of UV‑resistant polycarbonate.
Also available as an emergency...
Zone 21, 2, 22
Explosion‑protected floodlight with LED modules, equipped with a built‑in battery (3 hours) for emergency lighting.
Designed to operate in zones 21, 2 and 22 with explosion risks from gases, vapours and mists of flammable liquids, as well as from combustible dust and fibres.
The housing is made of aluminium, and...
Zone 1, 2, 21 and 22
Explosion‑protected exit luminaire with LED modules. Designed to operate in zones 1/21 and 2/22 with explosion risks from gases, vapours and mists of flammable liquids mixed with air, as well as from combustible dust and fibres.
The housing is made of aluminium.
The diffuser is made of UV‑resistant...
Zone 2, 22
Explosion‑protected LED luminaire.
Designed for use in zones 2 and 22 with gases and vapours from flammable liquids, as well as in hazardous areas with combustible dust and fibre‑related explosion risks.
The housing is made of GRP.
The diffuser is made of UV‑resistant polycarbonate.
Also available as...































