- Zone 1/21 - Ex safety switch SKX 15/MSRU - II 2GD Ex db eb IIC T6 Gb IP66 - GRP 200x150x80mm - 16A, 4P, ON-OFF, padlocking in two position  - 6 x terminals 4sqmm - 2 x PE terminals ...

Suction/supply connections Boxer 100 1" f BSPP (*) Suction/feed connections FDA Boxer 100 1”1/2 Clamp BS 4825’ Air fitting 3/8" f BSPP Max. flow* 160 l/min Max. supply air pressure 8 bar Max. main* 80 m Max negative suction head - dry run** 4 m Max negative suction head - with pump primed 9.5 m Max. diameter suspended substances 4...

Approved for Zone 1/21 Explosion-proof and dustproof linear LED lighting Length 750mm SMC polyester plastic reinforced with fiberglass, color RAL 7038 4000K 5 year warranty Supplied with socket wrench, two Ex cable glands M25, two Ex blind plugs M25 and ceiling bracket in nickel-plated brass. ...

Approved for Zone 1/21 Explosion-proof and dustproof linear LED lighting Length 1370mm SMC polyester plastic reinforced with fiberglass, color RAL 7038 4000K 5 year warranty Supplied with socket wrench, two Ex cable glands M25, two Ex blind plugs M25 and ceiling bracket in nickel-plated brass. ...

Zone 1/21 High colour rendering index CRI >80 Estimated service life ≥50 000 working hours at tamb = 40°C LED 3 x 12W chip-on-board technology with OVP, OCP, OTP protection Autonomous activation after recovery Suitable for linear lighting up to 20 modules

- Zone 1/21 - Housing: aluminium powder painted casting - Diffuser: borosilicate glass, silicone gasket - Protected grid: AISI 316 - Standard version without protected grid On request - Protection grid - 110 V AC/DC - 48 V AC/DC

Zone 1/21 Ex classified emergency stop box Interlocked, reset by pulling out the emergency pressure again Cable gland M25 for cable 6-15 mm

Ex control unit  Zone 1/21 2x pushbuttons and emergency STOP mushroom 1x M25 plastic CG at bottom side for cable 6-15mm <span lang="en-us" style="color:#1f497d;"...

Zone 1/21 Pushbutton box / control box Approved for Zone 1/21 2x pushbuttons (start, stop) PBT 01 - SPO 01/1 - SPO 01/2, 2x signal lamps SLP - 02/1 - SPO 02/2, 2x cable glands SPU 25 IP 66 IK 08 We supply various combinations of control boxes. Also customized solutions. Please see our data sheet...

Zone 1/21 Enclosure made of glass-fibre reinforced polyester resin 2 pole OFF switch or changeover switch

Approved for Zone 1/21  Dimension:  225 x 82 x 69mm Voltage: 230V Power output: 65W at 5°C Temperature class: T4 Protection class: IP 65 Temperature range: - 55°C up to +85°C

Zone 1/21 Used for marking escape routes and exits in potentially explosive atmos[1]pheres Self-test, monitor[1]ing and diagnostics reduce costly maintenance checks 3h autonomy Maintained / Non maintained opera[1]tion DALI Digital Ad[1]dressable Lighting Interface 3 lithium-ion sec[1]ondary cells...

Zone 1/21 Polyolefin Can withstand on/off 85/85°C 230V AC ATEX, IECEx, EAC

Zone 1/21 Fluoropolymer Can withstand on/off 85/85°C  230V AC (Also available as 110V AC upon request) ATEX, IECEx, EAC

Zone 1/21 Fluoropolymer Can withstand on/off 100/100°C  230V AC (Also available as 110V AC upon request) ATEX, IECEx, EAC

Zone 1/21 Polyolefin 45 W/m @ 10°C, 230V AC (T3) Frost protection Can withstand on/off 100/100°C  230V AC (Also available as 110V AC upon request) ATEX, IECEx, EAC

Zone 1/21 Enclosures made of PA glass fiber reinforced polyamide <span...

Zone 1/21 Enclosures made of PA glass fiber reinforced polyamide The cover screws and all other external...

Fluoropolymer 15, 30, 45 och 60 W/m (T3)  75 W/m (T2)  Frost protection Can withstand on/off 200/225°C  230V AC (Also available as 110V AC upon request) ATEX, IECEx, EAC

Zone 1/21 Housing: SMC polyester plastic reinforced with glass fiber, color RAL 7038 Diffuser: PC polycarbonate plastic Gasket: silicone 28W, 3820 lm Central locking: can be opened/closed using a socket key SW8, hinged lamp cover The light fitting is normally supplied with socket key, two Ex e cable...

Fluoropolymer 15, 30, 45 och 60 W/m (T3)  75, 90 och 120 W/m (T2)  Can withstand on/off 200/225°C  230V AC (Also available as 110V AC upon request) ATEX, IECEx, EAC

- Zone 1/21 - Ex db eb op is  IIC T6 Gb   Ex tb op is IIIC T80°C  D - Highest efficiency - High color rendering index CRI 80 - Estimated service life 70 000 hours - With OVP, OCP, OTP protection -  IP 66 - Autonomous reactivation after recovery - 90-305 VAC

Zone 2/22 Pressed steel Robust On request ACC 966, flexible bracket, fits both ceiling and wall Through-wiring  Emergency light fitting

Luminaires G2X LED are suited for hazardous areas of industrial plants and space included in Zones 2 and 22. The advantages of this luminaires series: Simple, easy and quick installation High resistance to corrosive industrial environment High luminous efficiency Quality ignition systems UV resistant. ...

Zone 1/21 Low weight/3,5 kg Up to 70W HSE (5900lm) IP 66 230V ±10% AC, FLASH 24V, 110V, 230V Protected galvanized steel gird, assembly set for wall, pipe and ceiling mountinge. On request Protected galvanized steel gird INOX 

Zon 1/21 Life time up till 100000 h Steady/flashing funtions IP 66 24 VAC/DC, 110-120 VAC. 230-240 VAC

Zone 1/21 Enclosures in shock-resistant glass fibre reinforced polyester resin 7 basic enclosure sizes Fitted according to the customer’s requirements Enviroment temperature: -20°C ÷ +50 °C Fitted according to the customer’s requirements Byggs efter kundens krav  Up to 125 A (depend on size and...

We supply customized Ex control units in different sizes GRP Stainless steel  Contact us for more info.

Zone 1/21 Ambient temperature ATEX -40°C ÷ +50 °C For terminals from 50...300 mm2 IP 66 IK 09 Upp till 450A See data sheet and do not hesitate to contact us if you have any questions

- Zone 1/21 - Stainless steel  AIS 316L, 1,5mm - Ambient temperature ATEX -40°C ÷ +50 °C - For terminals from 50...300 mm2 - IP 66 - IK 09 - Up to 450A See our data sheet and do not hesitate to contact us if you have any questions

Zone 1/21 We build customized control units   Feel free to contact us for more information or to get a quote

Zone 1/21 and 2/22 Active earthing system for static earthing and permanent monitoring Permanent removal of electrostatic charge during filling or emptying of tanks (tracks, tram tanks, drums) 10 m spiral cable Two output contacts

Zone 1 Connection between flameproof enclosures or between flameproof enclosure and enclosure with another type of protection Rated voltage Uo / U: 400/1000 V AC Rated cross-section 1,5 - 50 mm2 Contact us directly for more information, a quote or questions.

We supply our customers with Ex de, db, eb, ec and tb/tc motors approved for Zone 1/21 or Zone 2/22. Foot, flange, directly connected, connected via a box, motors with extra cooling, certified brake, customized solutions, etc. Power range: 0,08-200kW @50Hz Efficiency class: IE1, IE2, IE3 and IE4 Temperature class (G) T3, T4, T5 and T6 or (D) T90°C, T135°C and T160°C...

Zone 1/21 Temperature range: from -20°C to +500°C Compact design 16A / 230V switching capacity Cross section 4 / 6mm² 4 / 6mm sensor diameter Resistant to chemical influences 

Zone 21, 2/22 &gt;70 000 hours L80B10 Ambient temperature -40°C till +45°C IP 66, IP 67 230V, 0/50-60Hz Certificate: ATEX, IECEx On request Emergency LED light fitting