Luminaire body: stainless steel 1.4404, polished attached components: stainless steel 1.4301 cable entry: M20 x 1.5
Dustproof and water jet safe, IP 65 and 67 acc. according to EN 60 529
230 v and 24 v
World's Fastest Online Shopping Destination
World's Fastest Online Shopping Destination
View Left Column
Filter
43 products
Grid
Grid-2
List
List-2
Catelog
Filter
Active filters
Zone 1/21
Supplied with 10 meters cable
Without plug
Replaceable 2x8W fluorescent tube
Without switch
Supplied with swivelling hook
Category 2G (gas) Protection type: Explosion proof case Ex d IIC, Temperature class T5
Category 2D (powder) Protection type: Ex tD A21 IP68 case, maximum surface...
- Zone 1/21
- Housing: aluminium powder painted casting
- Diffuser: borosilicate glass, silicone gasket
- Protected grid: AISI 316
- Standard version without protected grid
On request
- Protection grid
- 110 V AC/DC
- 48 V AC/DC
Sight glass fittings are suitable for ambient temperatures of up to 60°C, depending on which bulb is fitted.
Cable entry with pressure-tight resin-molded connection cable, Sinotherm 110 H05GG-F 3G, 1.5 mm², standard cable length: 2 m
Protective conductor terminal: Internal terminal already connected, additional external protective...
Zone 0
Ex ia IIC T4 Ga
IP68
LED torchlights 43 och 60 lm
LED headlight 43 lm
ATEX designation:
II 2G Ex db IIC T6/T4 Gb
II 2D Ex tb IIIC T85°C / 130°C Db
Approved for Zone 1/2 (gas) and Zone 21/22 (dust)
Protection rating IP65/IP67
Low‑heat LED technology for sensitive processes
Compatible with DIN 28120 / 28121, DIN 11851,...
- Ex-safe LED flashlight with 3 POWER LEDs / 6500K
-Protective tube polycarbonate, impact resistant, 40 mm diameter
-Diffuser foil integrated
-Handle/end neoprene, black
-Metal hook yes, plastic
-Protection category: IP68 - 50m/5h (dust and waterproof)
-Protection class: II / III
-Cable standard version: 10m H07RN-F 2 x 1.0 mm² (extendable in...
Approved for Zone 1/21
Explosion-proof and dustproof linear LED lighting
Length 750mm
SMC polyester plastic reinforced with fiberglass, color RAL 7038
4000K
5 year warranty
Supplied with socket wrench, two Ex cable glands M25, two Ex blind plugs M25 and ceiling bracket in nickel-plated brass. ...
- New
- New
ATEX designation: II 2G Ex d e m b IIC T6 Gb
Certificate: ZELM 06 ATEX 0301
Approved for Zone 1/2 (gas)
Protection rating IP65
Nominal voltage: 24 V, 120 V or 230 V AC/DC
Time range: 1–60 minutes
Max switching power: 3000 VA
Continuous ON mode available
- Ex-safe LED flashlight with 6 POWER LEDs / 6500K
- Protective tube polycarbonate, impact resistant, 40 mm diameter
- Diffuser foil integrated
- Handle / end: neoprene, black
- Metal hook yes, plastic
- Protection category IP68 - 50m/5h (dust and waterproof)
- Protection class: II / III
- Cable standard version 10m H07RN-F 2 x 1.0 mm²...
Approved for Zone 1/21
Explosion-proof and dustproof linear LED lighting
Length 1370mm
SMC polyester plastic reinforced with fiberglass, color RAL 7038
4000K
5 year warranty
Supplied with socket wrench, two Ex cable glands M25, two Ex blind plugs M25 and ceiling bracket in nickel-plated brass. ...
Home
GalaLED Ex
Explosion-proof work lighting with excellent thermal management.
The LED unit is directly mounted on the top and bottom covers, which function as an efficient heat sink.
The LED light source provides circular light distribution at 360°.
High light intensity without glare.
Lightweight—only 2.3 kg.
LED light...
Zone 2/22
Pressed steel
Robust
On request
ACC 966, flexible bracket, fits both ceiling and wall
Through-wiring
Emergency light fitting
- Explosion-proof LED flashlight with 18 POWER LEDs / 6500K
- 360° lighting
- Short switch-on time / long service life / low energy consumption
- Low light weight of approx. 1.5 kg
- Impact-resistant polycarbonate protective tube, 50 mm diameter
- Glare-free light thanks to the integrated diffuser film
- Durable neoprene handle with a pleasant...
Zone 1/21
Housing: SMC polyester plastic reinforced with glass fiber, color RAL 7038
Diffuser: PC polycarbonate plastic
Gasket: silicone
28W, 3820 lm
Central locking: can be opened/closed using a socket key SW8, hinged lamp cover
The light fitting is normally supplied with socket key, two Ex e cable...
Zone 1/21
Housing: SMC polyester plastic reinforced with glass fiber, color RAL 7038
Diffuser: PC polycarbonate plastic
Gasket: silicone
56 W, 7645 lm
Central locking: can be opened/closed using a socket key SW8, hinged lamp cover
The light fitting is normally supplied with socket key, two Ex e cable...
Zone 21, 2/22
Robust, recommended for outdoor environments
>70 000 hours L80B10
Ambient temperature -40°C to +50°C
IP 67
230V, 0/50-60Hz
Certificate: ATEX, IECEx
Zone 21, 2/22
>70 000 hours L80B10
Ambient temperature -40°C till +45°C
IP 66, IP 67
230V, 0/50-60Hz
Certificate: ATEX, IECEx
On request
Emergency LED light fitting
Zone 21, 2/22
>70 000 hours L80B10
Ambient temperature -40°C till +45°C
IP 66, IP 67
230V, 0/50-60Hz
Certificate: ATEX, IECEx
Zone 1/21
Ambient temperature -30°C till 55°C
220-250VAC 50/60Hz
4000K
100 000h lifetime
Home
TACAO EXL400LED
- Long lifetime: >>70 000 hours L80B10 <span style="color:#4f4f4f;font-family:'Open Sans',...
-40°C to +55°C
IP66 / IP67
110-254V, 50-60Hz, 220-250V, 0Hz, or 220-240V 0,50-60Hz
4000K or 6500K
LED- luminaire Zone 2/22
• IP65
• Maximum ambient temperature up to ta = 45°C
• High chemical and mechanical robustness IK10
• Diffuser: satin tempered safety glass
• Frame: stainless steel
• Up to 45% lower electricity consumption when
compared to tube T5
• It can be supplied in dimmable or permanent
emergency version M3h
LED-fixtures Zone 2/22
• IP66
• Maximum ambient temperature up to ta = 60°C
• Diffuser: transparent polycarbonate (PC) = high mechanical resistance
• Frame: gray polycarbonate (PC) = high mechanical resistance
• Up to 45% lower electricity consumption when compared to fluorescent tubes
• Constant luminous flux even at an ambient temperature of -25...
LED luminaire Zone 1/22
IP67
Standard color 6500K, option 4000K
110-254VAC (50-60Hz), 220-250VDC
Powder coated stainless steel
Ambient temp -40°C do +45°C/+55°C/+60°C*
PRODUCTS
Juko Alx
-Frame extruded aluminium
-Cover special ice cream
- Optics PMMA
- Fastener A4
-Cable grommets polyamide (7J type)
-Mounting Wall / ceiling / post
-Installation adapters optional
-Adjustability with adapters
-Voltage AC
-Nominal voltage 230
-Type of driver constant current
-Power 25W - 100W
-Type of joint...
GRP linear luminaire in glass-reinforced polyester includes IECEx / ATEX Zone 1/21 & 2/22 certification and is the ultimate solution for heavy industry and hazardous applications, such as the oil and gas industry, petrochemicals, mining, and heavy manufacturing.
Available in sizes 764 mm and 1244 mm.
Innovative bracket system, with variable fixing distance, allows for simple installation, easy retrofit and the possibility of rotating the lighting fixture at -30°/0°/+30°.
<span...
Explosion-proof: Certified for ATEX zones 1/21 & 2/22
Durable construction: Made from steel sheet (RAL 9003) or stainless steel (AISI 304)
High efficiency: 147 lm/W system efficacy for optimal energy...
Approved for hazardous zones 1, 21 & 2, 22 (gas, vapor, dust)
Certified according to ATEX (KDB 15ATEX0049X) and IECEx (KDB 20.0003X)
Equipped with LED modules with a lifespan of over 70,000 hours (L80 B10)
Operating temperature range: -40°C to +45°C / +55°C / +60°C depending on version
Protection rating: IP67, Class...
ATEX classification:
II 3G Ex nR IIC T6 Gc – approved for Zone 2 (gas)
II 3D Ex tc IIIC T70°C Dc – approved for Zone 22 (dust)
Certifications: CE, UKEX, ATEX
Protection rating: IP66, IK10
Lifetime: 50,000 hours (L80/B20)
Temperature range: +5°C to +50°C
Materials: Grey polycarbonate (UV-stable), steel...
Zone 1, 2, 21 and 22
Explosion‑proof LED luminaire.
Designed for use in Zones 1, 21 and 2, 22 with hazards from gases and vapors of flammable liquids, as well as combustible dusts and fibers.
The housing is made of GRP.
The cover is made of PMMA or UV‑resistant polycarbonate.
Also available as an emergency...
Zone 1, 2, 21 and 22
Explosion‑proof LED emergency luminaire.
Designed for use in Zones 1, 21 and 2, 22 where there is a risk of gases and vapors from flammable liquids, as well as combustible dusts and fibers.
The housing is made of GRP.
The cover is made of PMMA or UV‑resistant polycarbonate.
Equipped with an...
Zone 1, 2, 21 and 22
Explosion‑proof LED emergency luminaire. Designed for operation in Zones 1, 21 and 2, 22 with explosion hazards from gases, vapors and mists of flammable liquids, as well as combustible dusts and fibers.
The housing is made of aluminum and the cover is made of UV‑resistant polycarbonate or tempered glass. ...
Explosion‑protected LED luminaire.
Designed for use in zones 21 & 2, 22 with gases and vapours from flammable liquids, as well as hazardous areas with combustible dust and fibres.
Housing made of GRP.
Diffuser made of UV‑resistant polycarbonate.
Also available as an emergency version with built‑in battery or for...