Luminaire body: stainless steel 1.4404, polished attached components: stainless steel 1.4301 cable entry: M20 x 1.5
Dustproof and water jet safe, IP 65 and 67 acc. according to EN 60 529
230 v and 24 v
World's Fastest Online Shopping Destination
World's Fastest Online Shopping Destination
View Left Column
Filter
29 products
Grid
Grid-2
List
List-2
Catelog
Filter
Active filters
Home
Ex Floodlights
- Zone 1/21
- Ex db eb op is IIC T6 Gb
Ex tb op is IIIC T80°C D
- Highest efficiency
- High color rendering index CRI 80
- Estimated service life 70 000 hours
- With OVP, OCP, OTP protection
- IP 66
- Autonomous reactivation after recovery
- 90-305 VAC
Zone 1/21
Housing: SMC polyester plastic reinforced with glass fiber, color RAL 7038
Diffuser: PC polycarbonate plastic
Gasket: silicone
28W, 3820 lm
Central locking: can be opened/closed using a socket key SW8, hinged lamp cover
The light fitting is normally supplied with socket key, two Ex e cable...
- Zone 1/21
- Housing: aluminium powder painted casting
- Diffuser: borosilicate glass, silicone gasket
- Protected grid: AISI 316
- Standard version without protected grid
On request
- Protection grid
- 110 V AC/DC
- 48 V AC/DC
Sight glass fittings are suitable for ambient temperatures of up to 60°C, depending on which bulb is fitted.
Cable entry with pressure-tight resin-molded connection cable, Sinotherm 110 H05GG-F 3G, 1.5 mm², standard cable length: 2 m
Protective conductor terminal: Internal terminal already connected, additional external protective...
Zone 1/21
Housing: SMC polyester plastic reinforced with glass fiber, color RAL 7038
Diffuser: PC polycarbonate plastic
Gasket: silicone
56 W, 7645 lm
Central locking: can be opened/closed using a socket key SW8, hinged lamp cover
The light fitting is normally supplied with socket key, two Ex e cable...
PRODUCTS
Ex Linear LED fixtures 310
Zone 1/21
High colour rendering index CRI >80
Estimated service life ≥50 000 working hours at tamb = 40°C
LED 3 x 12W chip-on-board technology with OVP, OCP, OTP protection
Autonomous activation after recovery
Suitable for linear lighting up to 20 modules
ATEX designation:
II 2G Ex db IIC T6/T4 Gb
II 2D Ex tb IIIC T85°C / 130°C Db
Approved for Zone 1/2 (gas) and Zone 21/22 (dust)
Protection rating IP65/IP67
Low‑heat LED technology for sensitive processes
Compatible with DIN 28120 / 28121, DIN 11851,...
Zone 1/21 and Zone 2/22
Device category: II 2GD
Explosion protection: Ex db eb op is IIC T4 Gb
Ex tb op is IIIC T100°C Db
Ambient temperature: -40°C ÷ +50°C
Enclosure class: IP66
Rated voltage: (110 – 240 ± 10 %) V AC
Zone 1/21
Used for marking escape routes and exits in potentially explosive atmos[1]pheres
Self-test, monitor[1]ing and diagnostics reduce costly maintenance checks
3h autonomy
Maintained / Non maintained opera[1]tion
DALI Digital Ad[1]dressable Lighting Interface
3 lithium-ion sec[1]ondary cells...
- New
- New
ATEX designation: II 2G Ex d e m b IIC T6 Gb
Certificate: ZELM 06 ATEX 0301
Approved for Zone 1/2 (gas)
Protection rating IP65
Nominal voltage: 24 V, 120 V or 230 V AC/DC
Time range: 1–60 minutes
Max switching power: 3000 VA
Continuous ON mode available
ATEX classification:
II 3G Ex nR IIC T6 Gc – approved for Zone 2 (gas)
II 3D Ex tc IIIC T70°C Dc – approved for Zone 22 (dust)
Certifications: CE, UKEX, ATEX
Protection rating: IP66, IK10
Lifetime: 50,000 hours (L80/B20)
Temperature range: +5°C to +50°C
Materials: Grey polycarbonate (UV-stable), steel...
Explosion-proof spotlight with RFID and advanced LED technology.
Operates on 230V AC and safety low voltage at 42V AC according to CENELEC standard HD63751.
Light output of up to 20,000 lumens.
High protection level for demanding environments.
Not a modified luminaire, but a specially designed LED unit with a robust...
Zone 1, 2, 21 and 22
Explosion‑proof LED emergency luminaire.
Designed for use in Zones 1, 21 and 2, 22 where there is a risk of gases and vapors from flammable liquids, as well as combustible dusts and fibers.
The housing is made of GRP.
The cover is made of PMMA or UV‑resistant polycarbonate.
Equipped with an...
Classifications: IP66
Lens: Tempered glass (clear)
Light distribution: Medium, narrow, wide
Color temperature & Color rendering (CCT & CRI): Cool white 5000K, neutral white 4000K; 80 CRI
Operating voltage: 100–277 VAC
Brightness: 9,650 – 23,500 lumens
Mounting options: Bracket in 316 stainless...
Zone 1, 2, 21 and 22
Explosion‑proof LED emergency luminaire. Designed for operation in Zones 1, 21 and 2, 22 with explosion hazards from gases, vapors and mists of flammable liquids, as well as combustible dusts and fibers.
The housing is made of aluminum and the cover is made of UV‑resistant polycarbonate or tempered glass. ...
Certified II 2GD Ex db op is IIC T6 Gb
Certified Ex tb op is IIIC T… Db
Available in 2700K warm colour temperature
Impact‑resistant borosilicate glass
Low‑copper aluminium heads for corrosion resistance
High‑efficiency aluminium reflector
Round design reduces dust build‑up
Suitable for oil...
Zone 1, 21, 2 and 22
Explosion‑proof LED floodlight.
Designed for operation in Zones 1, 21 and 2, 22 with explosion hazards from gases, vapors and mists of flammable liquids, as well as combustible dusts and fibers.
The housing is made of aluminum and the front glass is made of tempered glass.
Explosion‑protected LED luminaire.
Designed for use in zones 21 & 2, 22 with gases and vapours from flammable liquids, as well as hazardous areas with combustible dust and fibres.
Housing made of GRP.
Diffuser made of UV‑resistant polycarbonate.
Also available as an emergency version with built‑in battery or for...
Volt - From 24V to 48V both AC and DC both 2p and 3p connectors
Watts - 35W
Light sources - 81 LEDs, 5000°K
Lumen - 4100
Composition - Throughout antistatique polypropylene, metal frame, stainless steel bolts.
Lens...
Explosion‑protected LED luminaire.
Designed for use in zones 21 & 2, 22 with gases and vapours from flammable liquids, as well as combustible dust and fibres in hazardous areas.
The housing is made of powder‑coated stainless steel.
The diffuser is made of UV‑resistant polycarbonate.
Also available as an emergency...
Zone 21, 2, 22
Explosion‑protected floodlight with LED modules, equipped with a built‑in battery (3 hours) for emergency lighting.
Designed to operate in zones 21, 2 and 22 with explosion risks from gases, vapours and mists of flammable liquids, as well as from combustible dust and fibres.
The housing is made of aluminium, and...
Explosion‑protected floodlight with LED modules and special optics.
Designed for use in zones 21, 2 and 22 with gases and vapours from flammable liquids, as well as hazardous areas with combustible dust and fibres.
The housing is made of powder‑coated stainless steel or brushed stainless steel.
Front glass made of tempered...
Zone 1, 2, 21 and 22
Explosion‑protected exit luminaire with LED modules. Designed to operate in zones 1/21 and 2/22 with explosion risks from gases, vapours and mists of flammable liquids mixed with air, as well as from combustible dust and fibres.
The housing is made of aluminium.
The diffuser is made of UV‑resistant...
Zone 21, 2, 22
Explosion‑protected floodlight with LED modules.
Designed to operate in zones 21, 2 and 22 with explosion risks from gases, vapours and mists of flammable liquids, as well as from combustible dust and fibres.
The housing is made of aluminium, and the front cover is made of polycarbonate or tempered glass.
Zone 2, 22
Explosion‑protected LED luminaire.
Designed for use in zones 2 and 22 with gases and vapours from flammable liquids, as well as in hazardous areas with combustible dust and fibre‑related explosion risks.
The housing is made of GRP.
The diffuser is made of UV‑resistant polycarbonate.
Also available as...
ATEX/IECEx certified for Zone 1 and 2
5000 cd white LED (5700 K)
Input voltage: 100–240 VAC or 24 VDC
Aluminium or SS316 housing, IP67
100,000+ hours lifetime
8 W power consumption
Operating temperature –25 °C to +60 °C
ICAO Annex 14 & CAP437 compliant
Multiple M25 cable...