- Zone 1/21 - Ex safety switch SKX 15/MSRU - II 2GD Ex db eb IIC T6 Gb IP66 - GRP 200x150x80mm - 16A, 4P, ON-OFF, padlocking in two position  - 6 x terminals 4sqmm - 2 x PE terminals ...

Zone 21, 2/22 >70 000 hours L80B10 Ambient temperature -40°C till +45°C IP 66, IP 67 230V, 0/50-60Hz Certificate: ATEX, IECEx On request Emergency LED light fitting

- Zone 1/21 - Ex db eb op is  IIC T6 Gb   Ex tb op is IIIC T80°C  D - Highest efficiency - High color rendering index CRI 80 - Estimated service life 70 000 hours - With OVP, OCP, OTP protection -  IP 66 - Autonomous reactivation after recovery - 90-305 VAC

Fluoropolymer 15, 30, 45 och 60 W/m (T3)  75, 90 och 120 W/m (T2)  Can withstand on/off 200/225°C  230V AC (Also available as 110V AC upon request) ATEX, IECEx, EAC

Zone 1/21 High colour rendering index CRI >80 Estimated service life ≥50 000 working hours at tamb = 40°C LED 3 x 12W chip-on-board technology with OVP, OCP, OTP protection Autonomous activation after recovery Suitable for linear lighting up to 20 modules

Fans aprroved for Zone 1/21 or Zone 2/22 Inlet size: 315 up to 1600 mm Fan capability: air flow up to 70 m3/s, static pressure ∆pstat to 1400 Pa Motor IEC frame size: 63 up to 315 Surface treatment: Primer and paint finish, or hot-dip  galvanized - on request Materials: fan made of corrosion resistant cast...

Fans aprroved for Zone 1/21 or Zone 2/22 Inlet size: 250 up to 1100 mm Capability: air flow up to 15 m3/s, static pressure ∆pstat to 9000 Pa Motor IEC frame size: 63 up to 315 Surface treatment: primer and paint finish, or hot-dip  galvanized - on request Materials: fan made of steel, inlet made of steel or...

Approved for Zone 1/21 We deliver handheld controls on request Contact us for more information or a quote

Compact combined 100 dB (A) alarm sound and LED lighthouse. Only a Zener barrier or galvanic isolator is required to run both sonar and signal light or alternatively the unit can be used as individual signals. Approved for Zone 0/20 LED colors: red, amber, blue, green and clear 16-28vdc via Zener barrier or galvanic...

Approved for Zone 1/21 Explosion-proof and dustproof linear LED lighting Length 750mm SMC polyester plastic reinforced with fiberglass, color RAL 7038 4000K 5 year warranty Supplied with socket wrench, two Ex cable glands M25, two Ex blind plugs M25 and ceiling bracket in nickel-plated brass. ...

- Zone 1/21 - Housing: aluminium powder painted casting - Diffuser: borosilicate glass, silicone gasket - Protected grid: AISI 316 - Standard version without protected grid On request - Protection grid - 110 V AC/DC - 48 V AC/DC

Zone 1/21 Ex classified emergency stop box Interlocked, reset by pulling out the emergency pressure again Cable gland M25 for cable 6-15 mm

Approved for Zone 1/21 Explosion-proof and dustproof linear LED lighting Length 1370mm SMC polyester plastic reinforced with fiberglass, color RAL 7038 4000K 5 year warranty Supplied with socket wrench, two Ex cable glands M25, two Ex blind plugs M25 and ceiling bracket in nickel-plated brass. ...

Ex control unit  Zone 1/21 2x pushbuttons and emergency STOP mushroom 1x M25 plastic CG at bottom side for cable 6-15mm <span lang="en-us" style="color:#1f497d;"...

Zone 1/21 Pushbutton box / control box Approved for Zone 1/21 2x pushbuttons (start, stop) PBT 01 - SPO 01/1 - SPO 01/2, 2x signal lamps SLP - 02/1 - SPO 02/2, 2x cable glands SPU 25 IP 66 IK 08 We supply various combinations of control boxes. Also customized solutions. Please see our data sheet...

Zone 1/21 Enclosure made of glass-fibre reinforced polyester resin 2 pole OFF switch or changeover switch

Zone 1/21 Housing: SMC polyester plastic reinforced with glass fiber, color RAL 7038 Diffuser: PC polycarbonate plastic Gasket: silicone 28W, 3820 lm Central locking: can be opened/closed using a socket key SW8, hinged lamp cover The light fitting is normally supplied with socket key, two Ex e cable...

Zone 1/21 Used for marking escape routes and exits in potentially explosive atmos[1]pheres Self-test, monitor[1]ing and diagnostics reduce costly maintenance checks 3h autonomy Maintained / Non maintained opera[1]tion DALI Digital Ad[1]dressable Lighting Interface 3 lithium-ion sec[1]ondary cells...

Zone 1/21 Polyolefin 45 W/m @ 10°C, 230V AC (T3) Frost protection Can withstand on/off 100/100°C  230V AC (Also available as 110V AC upon request) ATEX, IECEx, EAC

Zone 1/21 Fluoropolymer Can withstand on/off 100/100°C  230V AC (Also available as 110V AC upon request) ATEX, IECEx, EAC

Zone 1/21 Enclosures made of PA glass fiber reinforced polyamide <span...

Zone 1/21 Enclosures in shock-resistant glass fibre reinforced polyester resin 7 basic enclosure sizes Fitted according to the customer’s requirements Enviroment temperature: -20°C ÷ +50 °C Fitted according to the customer’s requirements Byggs efter kundens krav  Up to 125 A (depend on size and...

Zone 1/21 Ambient temperature ATEX -40°C ÷ +50 °C For terminals from 50...300 mm2 IP 66 IK 09 Upp till 450A See data sheet and do not hesitate to contact us if you have any questions

Zone 21, 2/22 Robust, recommended for outdoor environments &gt;70 000 hours L80B10 Ambient temperature -40°C to +50°C IP 67 230V, 0/50-60Hz Certificate: ATEX, IECEx

We supply our customers with Ex de, db, eb, ec and tb/tc motors approved for Zone 1/21 or Zone 2/22. Foot, flange, directly connected, connected via a box, motors with extra cooling, certified brake, customized solutions, etc. Power range: 0,08-200kW @50Hz Efficiency class: IE1, IE2, IE3 and IE4 Temperature class (G) T3, T4, T5 and T6 or (D) T90°C, T135°C and T160°C...

Zone 1/21 Steel flameproof construction Grey epoxy coating IP66 230V (other voltages on request) Ambient temperature range: -30°C to +40°C Check data sheet for options

Zone 1/21 Steel flameproof construction Grey epoxy coating IP66 230V (other voltages on request) Ambient temperature range: -30°C to +40°C Check data sheet for options

Protection grid ERB-PG provides extra protection against damage and touching. The grid is made of aluminium perforated plate in AISI 304, 2 mm thicknes

Heating elements: Ø8.5 to Ø12.7mm stainless steel AISI 316L or other SS grades Surface load on sheath: max. 1.3W/cm² Degree of protection: IP66 Voltage: up to 690V Design: quadrilateral, round or as an insert Temperature restrictions: all heaters are provided with a safety thermostat and thermofuse ...

We offer Ex e b and Ex d e cable glands, reducers, adapters, plugs, extensions, pipe fittings in plastic and metal. Zone 1, 21, Zone 2/22 and mining industry Plastic Metal For armoured cables For non-armoured cables Contact us for more information or a quote.

Zone 1/21 For heating cables up to 150 / 200°C For 1 or 2 heating circuits No damage by sheet metal insulation No mounting plate necessary No mounting angle necessary ATEX, IECEx  II2 GD T6

Zone 1/21 Compact design Temperature resistant up to 200°C Quick and easy to assemble Applicable with different types of heating tapes Further sets available

Zone 1/21 Compact design Temperature resistant up to 180°C Flexible usage Different sets seperately avaible Applicable for our heating tapes

Zone 1/21 Temperature resistant up to 190°C Compact design Current rating 20A Suitable for use with many types of heating cables Version brass nickel plated Upon request Version in stainless steel 

Adhesive tapes for fixing heating cables and for a better heat transfer. Aluminium Polyester Cloth adhesive tape Glass fiber tape

PT100 sensor connected to a transmitter built into a black glass fiber reinforced polyester junction box.