-40C to +55C 4600 - 5700 K IP66

Approved for hazardous zones 1, 21 & 2, 22 (gas, vapor, dust) Certified according to ATEX (KDB 15ATEX0049X) and IECEx (KDB 20.0003X) Equipped with LED modules with a lifespan of over 70,000 hours (L80 B10) Operating temperature range: -40°C to +45°C / +55°C / +60°C depending on version Protection rating: IP67, Class...

LED- luminaire Zone 2/22 • IP65 • Maximum ambient temperature up to ta = 45°C • High chemical and mechanical robustness IK10 • Diffuser: satin tempered safety glass • Frame: stainless steel • Up to 45% lower electricity consumption when compared to tube T5 • It can be supplied in dimmable or permanent emergency version M3h

ATEX classification: II 3G Ex nR IIC T6 Gc – approved for Zone 2 (gas) II 3D Ex tc IIIC T70°C Dc – approved for Zone 22 (dust) Certifications: CE, UKEX, ATEX Protection rating: IP66, IK10 Lifetime: 50,000 hours (L80/B20) Temperature range: +5°C to +50°C Materials: Grey polycarbonate (UV-stable), steel...

LED-fixtures Zone 2/22 • IP66 • Maximum ambient temperature up to ta = 60°C • Diffuser: transparent polycarbonate (PC) = high mechanical resistance • Frame: gray polycarbonate (PC) = high mechanical resistance • Up to 45% lower electricity consumption when compared to fluorescent tubes • Constant luminous flux even at an ambient temperature of -25...

Zone 1, 2, 21 and 22 Explosion‑proof LED luminaire. Designed for use in Zones 1, 21 and 2, 22 with hazards from gases and vapors of flammable liquids, as well as combustible dusts and fibers. The housing is made of GRP. The cover is made of PMMA or UV‑resistant polycarbonate. Also available as an emergency...

LED luminaire Zone 1/22 IP67 Standard color 6500K, option 4000K 110-254VAC (50-60Hz), 220-250VDC Powder coated stainless steel Ambient temp -40°C do +45°C/+55°C/+60°C*

Zone 1, 2, 21 and 22 Explosion‑proof LED emergency luminaire. Designed for use in Zones 1, 21 and 2, 22 where there is a risk of gases and vapors from flammable liquids, as well as combustible dusts and fibers. The housing is made of GRP. The cover is made of PMMA or UV‑resistant polycarbonate. Equipped with an...

Device category: II 2GD Explosion protection: Ex db eb mb IIC T6 Gb Ex tb IIIC T80°C Db Ambient temperature: -20°C ÷ +40°C Protection class: IP66 Rated voltage: 110-240 VAC

Housing: powder-coated aluminum casting Diffuser: borosilicate glass, Packaging: silicone Device category: II 2G II 2D Explosion protection: Ex db eb IIC T6 Gb Ex tb IIIC T80°C Db Ambient temperature: -40°C ÷ +40°C Protection class: IP66 Rated voltage: 220-240...

Explosion‑protected LED luminaire. Designed for use in zones 21 & 2, 22 with gases and vapours from flammable liquids, as well as hazardous areas with combustible dust and fibres. Housing made of GRP. Diffuser made of UV‑resistant polycarbonate. Also available as an emergency version with built‑in battery or for...

-Frame extruded aluminium -Cover special ice cream - Optics PMMA - Fastener A4 -Cable grommets polyamide (7J type) -Mounting Wall / ceiling / post -Installation adapters optional -Adjustability with adapters -Voltage AC -Nominal voltage 230 -Type of driver constant current -Power 25W - 100W -Type of joint...

Explosion‑protected LED luminaire. Designed for use in zones 21 & 2, 22 with gases and vapours from flammable liquids, as well as combustible dust and fibres in hazardous areas. The housing is made of powder‑coated stainless steel. The diffuser is made of UV‑resistant polycarbonate. Also available as an emergency...

Sight glass fittings are suitable for ambient temperatures of up to 60°C, depending on which bulb is fitted. Cable entry with pressure-tight resin-molded connection cable, Sinotherm 110 H05GG-F 3G, 1.5 mm², standard cable length: 2 m Protective conductor terminal: Internal terminal already connected, additional external protective...

- Ex-safe LED flashlight with 3 POWER LEDs / 6500K -Protective tube polycarbonate, impact resistant, 40 mm diameter -Diffuser foil integrated -Handle/end neoprene, black -Metal hook yes, plastic -Protection category: IP68 - 50m/5h (dust and waterproof) -Protection class: II / III -Cable standard version: 10m H07RN-F 2 x 1.0 mm² (extendable in...

Zone 1, 2, 21 and 22 Explosion‑protected exit luminaire with LED modules. Designed to operate in zones 1/21 and 2/22 with explosion risks from gases, vapours and mists of flammable liquids mixed with air, as well as from combustible dust and fibres. The housing is made of aluminium. The diffuser is made of UV‑resistant...

- Explosion-proof LED flashlight with 18 POWER LEDs / 6500K - 360° lighting - Short switch-on time / long service life / low energy consumption - Low light weight of approx. 1.5 kg - Impact-resistant polycarbonate protective tube, 50 mm diameter - Glare-free light thanks to the integrated diffuser film - Durable neoprene handle with a pleasant...

-Apparatus category II 2GD -Explosion protection Ex db eb op is IIC T6 Gb -Ex tb op is IIIC T80°C Db -Ambient temperature -20°C ÷ +50°C -Enclosure class IP66 -Rated voltage 220-240V

-Category II 2GD -Explosion protection Ex db eb mb IIC T6Gb -Ex tb IIIC T80°C Db -Ambient temperature -20°C ÷ +40°C -Enclosure class IP66 -Rated voltage 220-240VAC

Luminaire body: stainless steel 1.4404, polished attached components: stainless steel 1.4301 cable entry: M20 x 1.5 Dustproof and water jet safe, IP 65 and 67 acc. according to EN 60 529 230 v and 24 v

Zone 1/21 and Zone 2/22 Device category: II 2GD Explosion protection: Ex db eb op is IIC T4 Gb Ex tb op is IIIC T100°C Db Ambient temperature: -40°C ÷ +50°C Enclosure class: IP66 Rated voltage: (110 – 240 ± 10 %) V AC

Classifications: IP66 Lens: Tempered glass (clear) Light distribution: Medium, narrow, wide Color temperature & Color rendering (CCT & CRI): Cool white 5000K, neutral white 4000K; 80 CRI Operating voltage: 100–277 VAC Brightness: 9,650 – 23,500 lumens Mounting options: Bracket in 316 stainless...

Explosion-proof work lighting with excellent thermal management. The LED unit is directly mounted on the top and bottom covers, which function as an efficient heat sink. The LED light source provides circular light distribution at 360°. High light intensity without glare. Lightweight—only 2.3 kg. LED light...

Low power consumption and virtually unlimited lifespan. Silicone O-ring for IP66-rated mechanical sealing. Direct connection to lamp holder: L, N, PE (max cable cross-section: 4 mm²). Housing made of low-copper aluminum alloy. Stainless steel screws. Impact-resistant borosilicate glass, heat-resistant, enclosed...

The SafeSite® LED Bulkhead luminaire backed by Hazardous Area Certification, Zone 1/21 and 2/22, is a premium durable, compact and versatile lighting solution, designed to keep hazardous areas illuminated and safe

Innovative bracket system, with variable fixing distance, allows for simple installation, easy retrofit and the possibility of rotating the lighting fixture at -30°/0°/+30°. <span...

Product Overview Type: Traditional Rotating Beacon (ROTALLARM) Light Source: Incandescent bulb or halogen lamp (H1) Light Effect: Rotating light with a rotation speed of 160 ±30 revolutions per minute Luminous Intensity: Up to 4500...

Explosion-proof: Certified for ATEX zones 1/21 &amp; 2/22 Durable construction: Made from steel sheet (RAL 9003) or stainless steel (AISI 304) High efficiency: 147 lm/W system efficacy for optimal energy...

GRP linear luminaire in glass-reinforced polyester includes IECEx / ATEX Zone 1/21 &amp; 2/22 certification and is the ultimate solution for heavy industry and hazardous applications, such as the oil and gas industry, petrochemicals, mining, and heavy manufacturing. Available in sizes 764 mm and 1244 mm.

ATEX, IECEx, UKCA and ECASEx certified for Zone 1, 2, 21, and 22 High-intensity LED with immediate activation and visual comfort Available in two sizes with multiple optics directly mounted on the LED plate Aluminium alloy body with low copper content and cooling fins Tempered front glass resistant to heat and...

Zone 1, 2, 21 and 22 Explosion‑proof recessed/surface‑mounted LED luminaire. Designed for use in Zones 1, 21 and 2, 22 with risks from gases and vapors of flammable liquids, as well as hazardous areas with combustible dusts and fibers. The housing is made of powder‑coated stainless steel. The front cover is made of...

Zone 1, 2, 21 and 22 Explosion‑proof LED emergency luminaire. Designed for operation in Zones 1, 21 and 2, 22 with explosion hazards from gases, vapors and mists of flammable liquids, as well as combustible dusts and fibers. The housing is made of aluminum and the cover is made of UV‑resistant polycarbonate or tempered glass. ...

Zone 1, 21, 2 and 22 Explosion‑proof LED floodlight. Designed for operation in Zones 1, 21 and 2, 22 with explosion hazards from gases, vapors and mists of flammable liquids, as well as combustible dusts and fibers. The housing is made of aluminum and the front glass is made of tempered glass.