Zone 1, 2, 21 and 22
Explosion‑proof recessed/surface‑mounted LED luminaire.
Designed for use in Zones 1, 21 and 2, 22 with risks from gases and vapors of flammable liquids, as well as hazardous areas with combustible dusts and fibers.
The housing is made of powder‑coated stainless steel.
The front cover is made of...
World's Fastest Online Shopping Destination
World's Fastest Online Shopping Destination
View Left Column
Filter
52 products
Grid
Grid-2
List
List-2
Catelog
Filter
Active filters
Product Overview
Type: Traditional Rotating Beacon (ROTALLARM)
Light Source: Incandescent bulb or halogen lamp (H1)
Light Effect: Rotating light with a rotation speed of 160 ±30 revolutions per minute
Luminous Intensity: Up to 4500...
Home
Ex Floodlights
- Zone 1/21
- Ex db eb op is IIC T6 Gb
Ex tb op is IIIC T80°C D
- Highest efficiency
- High color rendering index CRI 80
- Estimated service life 70 000 hours
- With OVP, OCP, OTP protection
- IP 66
- Autonomous reactivation after recovery
- 90-305 VAC
- Zone 1/21
- Housing: aluminium powder painted casting
- Diffuser: borosilicate glass, silicone gasket
- Protected grid: AISI 316
- Standard version without protected grid
On request
- Protection grid
- 110 V AC/DC
- 48 V AC/DC
Home
Mini-Led 6J Ex
Low power consumption and virtually unlimited lifespan.
Silicone O-ring for IP66-rated mechanical sealing.
Direct connection to lamp holder: L, N, PE (max cable cross-section: 4 mm²).
Housing made of low-copper aluminum alloy.
Stainless steel screws.
Impact-resistant borosilicate glass, heat-resistant, enclosed...
Home
SIF 60 LED-E
-Category II 2GD
-Explosion protection Ex db eb mb IIC T6Gb
-Ex tb IIIC T80°C Db
-Ambient temperature -20°C ÷ +40°C
-Enclosure class IP66
-Rated voltage 220-240VAC
Zone 1/21 and Zone 2/22
Device category: II 2GD
Explosion protection: Ex db eb op is IIC T4 Gb
Ex tb op is IIIC T100°C Db
Ambient temperature: -40°C ÷ +50°C
Enclosure class: IP66
Rated voltage: (110 – 240 ± 10 %) V AC
Device category: II 2GD
Explosion protection: Ex db eb mb IIC T6 Gb
Ex tb IIIC T80°C Db
Ambient temperature: -20°C ÷ +40°C
Protection class: IP66
Rated voltage: 110-240 VAC
Approved for Zone 1/21
Explosion-proof and dustproof linear LED lighting
Length 750mm
SMC polyester plastic reinforced with fiberglass, color RAL 7038
4000K
5 year warranty
Supplied with socket wrench, two Ex cable glands M25, two Ex blind plugs M25 and ceiling bracket in nickel-plated brass. ...
Explosion‑protected recessed/surface‑mounted LED luminaire.
Designed for use in zones 21, 2 and 22 with gases and vapours from flammable liquids, as well as hazardous areas with combustible dust and fibres.
Housing made of powder‑coated stainless steel.
Front cover in polycarbonate or tempered glass.
Also available as an...
Explosion-proof spotlight with RFID and advanced LED technology.
Operates on 230V AC and safety low voltage at 42V AC according to CENELEC standard HD63751.
Light output of up to 20,000 lumens.
High protection level for demanding environments.
Not a modified luminaire, but a specially designed LED unit with a robust...
Zone 1/21
Low weight/3,5 kg
Up to 70W HSE (5900lm)
IP 66
230V ±10% AC, FLASH 24V, 110V, 230V
Protected galvanized steel gird, assembly set for wall, pipe and ceiling mountinge.
On request
Protected galvanized steel gird INOX
Approved for Zone 1/21
Explosion-proof and dustproof linear LED lighting
Length 1370mm
SMC polyester plastic reinforced with fiberglass, color RAL 7038
4000K
5 year warranty
Supplied with socket wrench, two Ex cable glands M25, two Ex blind plugs M25 and ceiling bracket in nickel-plated brass. ...
Classifications: IP66
Lens: Tempered glass (clear)
Light distribution: Medium, narrow, wide
Color temperature & Color rendering (CCT & CRI): Cool white 5000K, neutral white 4000K; 80 CRI
Operating voltage: 100–277 VAC
Brightness: 9,650 – 23,500 lumens
Mounting options: Bracket in 316 stainless...
Zon 1/21
Life time up till 100000 h
Steady/flashing funtions
IP 66
24 VAC/DC, 110-120 VAC. 230-240 VAC
Zone 2/22
Pressed steel
Robust
On request
ACC 966, flexible bracket, fits both ceiling and wall
Through-wiring
Emergency light fitting
Zone 1, 21, 2 and 22
Explosion‑proof LED floodlight.
Designed for operation in Zones 1, 21 and 2, 22 with explosion hazards from gases, vapors and mists of flammable liquids, as well as combustible dusts and fibers.
The housing is made of aluminum and the front glass is made of tempered glass.
Zone 1/21
Housing: SMC polyester plastic reinforced with glass fiber, color RAL 7038
Diffuser: PC polycarbonate plastic
Gasket: silicone
28W, 3820 lm
Central locking: can be opened/closed using a socket key SW8, hinged lamp cover
The light fitting is normally supplied with socket key, two Ex e cable...
Volt - From 24V to 48V both AC and DC both 2p and 3p connectors
Watts - 35W
Light sources - 81 LEDs, 5000°K
Lumen - 4100
Composition - Throughout antistatique polypropylene, metal frame, stainless steel bolts.
Lens...
Zone 1/21
Housing: SMC polyester plastic reinforced with glass fiber, color RAL 7038
Diffuser: PC polycarbonate plastic
Gasket: silicone
56 W, 7645 lm
Central locking: can be opened/closed using a socket key SW8, hinged lamp cover
The light fitting is normally supplied with socket key, two Ex e cable...
Zone 21, 2/22
Robust, recommended for outdoor environments
>70 000 hours L80B10
Ambient temperature -40°C to +50°C
IP 67
230V, 0/50-60Hz
Certificate: ATEX, IECEx
Explosion‑protected floodlight with LED modules and special optics.
Designed for use in zones 21, 2 and 22 with gases and vapours from flammable liquids, as well as hazardous areas with combustible dust and fibres.
The housing is made of powder‑coated stainless steel or brushed stainless steel.
Front glass made of tempered...
Zone 21, 2/22
>70 000 hours L80B10
Ambient temperature -40°C till +45°C
IP 66, IP 67
230V, 0/50-60Hz
Certificate: ATEX, IECEx
On request
Emergency LED light fitting
Zone 21, 2, 22
Explosion‑protected floodlight with LED modules.
Designed to operate in zones 21, 2 and 22 with explosion risks from gases, vapours and mists of flammable liquids, as well as from combustible dust and fibres.
The housing is made of aluminium, and the front cover is made of polycarbonate or tempered glass.
Zone 21, 2/22
>70 000 hours L80B10
Ambient temperature -40°C till +45°C
IP 66, IP 67
230V, 0/50-60Hz
Certificate: ATEX, IECEx
Zone 21, 2, 22
Explosion‑protected floodlight with LED modules, equipped with a built‑in battery (3 hours) for emergency lighting.
Designed to operate in zones 21, 2 and 22 with explosion risks from gases, vapours and mists of flammable liquids, as well as from combustible dust and fibres.
The housing is made of aluminium, and...
Zone 1/21
Ambient temperature -30°C till 55°C
220-250VAC 50/60Hz
4000K
100 000h lifetime
ATEX/IECEx certified for Zone 1 and 2
5000 cd white LED (5700 K)
Input voltage: 100–240 VAC or 24 VDC
Aluminium or SS316 housing, IP67
100,000+ hours lifetime
8 W power consumption
Operating temperature –25 °C to +60 °C
ICAO Annex 14 & CAP437 compliant
Multiple M25 cable...
Home
TACAO EXL400LED
- Long lifetime: >>70 000 hours L80B10 <span style="color:#4f4f4f;font-family:'Open Sans',...
-40°C to +55°C
IP66 / IP67
110-254V, 50-60Hz, 220-250V, 0Hz, or 220-240V 0,50-60Hz
4000K or 6500K
LED- luminaire Zone 2/22
• IP65
• Maximum ambient temperature up to ta = 45°C
• High chemical and mechanical robustness IK10
• Diffuser: satin tempered safety glass
• Frame: stainless steel
• Up to 45% lower electricity consumption when
compared to tube T5
• It can be supplied in dimmable or permanent
emergency version M3h
LED-fixtures Zone 2/22
• IP66
• Maximum ambient temperature up to ta = 60°C
• Diffuser: transparent polycarbonate (PC) = high mechanical resistance
• Frame: gray polycarbonate (PC) = high mechanical resistance
• Up to 45% lower electricity consumption when compared to fluorescent tubes
• Constant luminous flux even at an ambient temperature of -25...
LED luminaire Zone 1/22
IP67
Standard color 6500K, option 4000K
110-254VAC (50-60Hz), 220-250VDC
Powder coated stainless steel
Ambient temp -40°C do +45°C/+55°C/+60°C*
PRODUCTS
Juko Alx
-Frame extruded aluminium
-Cover special ice cream
- Optics PMMA
- Fastener A4
-Cable grommets polyamide (7J type)
-Mounting Wall / ceiling / post
-Installation adapters optional
-Adjustability with adapters
-Voltage AC
-Nominal voltage 230
-Type of driver constant current
-Power 25W - 100W
-Type of joint...







































































