Explosion-proof – Certified for Zone 1–2 (Gas) and 21–22 (Dust). Robust construction – Made of GRP material with high impact resistance. IP66 rated – Protected against dust and water for use in demanding environments. Mechanical interlock – Secure connection with...

CONSTRUCTION Ring casing, in steel sheet. Metal upper cover resistant to the atmospheric agents. Protection grid on outlet side in steel rod, manufactured according to UNI EN ISO 12499. Impeller with high efficiency airfoil blades, variable pitch angle in still position in antistatic plastic material, hub in die-cast...

We have a wide range of different warning signals approved for Zone 0/20, 1/21 or 2/22. We offer flash lights, sound signals or combined alarm signal with light. Contact us or ask for a quote.

Zone 2/22 Pressed steel Robust On request ACC 966, flexible bracket, fits both ceiling and wall Through-wiring  Emergency light fitting

Fluoropolymer 15, 30, 45 och 60 W/m (T3)  75 W/m (T2)  Frost protection Can withstand on/off 200/225°C  230V AC (Also available as 110V AC upon request) ATEX, IECEx, EAC

Zone 1/21 High colour rendering index CRI >80 Estimated service life ≥50 000 working hours at tamb = 40°C LED 3 x 12W chip-on-board technology with OVP, OCP, OTP protection Autonomous activation after recovery Suitable for linear lighting up to 20 modules

Explosion-proof – Certified for Zones 1/21 & 2/22. Robust construction – Made of polycarbonate/polyamide for high durability. IP66 rated – Dust and waterproof for extreme environments. Secure connection – Interlock function prevents the plug from being...

Explosion-proof – Certified for Zones 1/21 & 2/22. Robust construction – Made from LM6 marine-grade aluminum for maximum durability. High brightness – 5 Joule Xenon flash for effective visual signaling. IP66-rated – Dust- and waterproof for extreme...

Construction Ring casing , in epoxy painted steel sheet with or without aluminum stripe around the impeller rotation area. Motor side protection grid, manufactured according to UNI EN ISO 12499 standards, in steel rod, protected against the atmospheric agents. Impeller with high efficiency airfoil blades, in aluminum, or in...

Fans aprroved for Zone 1/21 or Zone 2/22 Inlet size: 315 up to 1600 mm Fan capability: air flow up to 70 m3/s, static pressure ∆pstat to 1400 Pa Motor IEC frame size: 63 up to 315 Surface treatment: Primer and paint finish, or hot-dip  galvanized - on request Materials: fan made of corrosion resistant cast...

Available in seven sizes: 15, 20, 30, 40, 60, 80, 90, and 120 mm   Covers cable and pipe diameters from 3.5 to 110 mm   Ex-approved for explosive environments   Quick...

CONSTRUCTION High efficiency backward curved blade impeller in galvanized steel sheet. Balancing according to UNI ISO 21940-11. Installation base with inlet cone in metal sheet protected against the atmospheric agents. Outer protection guard in steel rod protected against the  atmospheric agents. Motor cap in steel sheet protected...

Fans aprroved for Zone 1/21 or Zone 2/22 Inlet size: 250 up to 1100 mm Capability: air flow up to 15 m3/s, static pressure ∆pstat to 9000 Pa Motor IEC frame size: 63 up to 315 Surface treatment: primer and paint finish, or hot-dip  galvanized - on request Materials: fan made of steel, inlet made of steel or...

Zone 1/21 Temperature range: from -20°C to +500°C Compact design 16A / 230V switching capacity Cross section 4 / 6mm² 4 / 6mm sensor diameter Resistant to chemical influences 

Available in eleven sizes   Covers 66 cable and pipe dimensions (3.5–69.5 mm)   Wing inserts for precise fit and flexibility   Ex and EMC approved for explosive and...

TECHNICAL SPECIFICATIONS DUCT- M (ATEX version)  Conveyed fluid: clean gas, not abrasive or corrosive.  Temperature conveyed fluid: -20°C / +40°C.  Voltage: three phase version (T) 400V-3Ph. Single phase version (M) 230V-1Ph.  Frequency: 50Hz.  Air flow from motor to impeller, position A (FMG).

Approved for Zone 1/21 We deliver handheld controls on request Contact us for more information or a quote

Zone 1/21 Temperature resistant up to 425°C Can be cut to length without wastage Outputs available up to 150W/m Full range of controls, accessories and approvals Available for 220..277V AC 110..120V AC upon request

Zone 2/22 Pressed steel Robust Length 1293mm On request ACC 966, flexible bracket, fits both ceiling and wall Through-wiring  Emergency light fitting

Designed for oversized holes – installed with flanged sleeve   Supplied as a complete kit with sealing and mounting components   Ex-rated (IECEx &amp; ATEX) for explosive environments   <span lang="en-us"...

 Supporting frame in antistatic plastic material or in steel sheet with or without aluminum stripe around the impeller rotation area. Inlet protection grid, with function of motor support, in steel rod manufactured in accordance with UNI EN 294. <span lang="en-us"...

Compact combined 100 dB (A) alarm sound and LED lighthouse. Only a Zener barrier or galvanic isolator is required to run both sonar and signal light or alternatively the unit can be used as individual signals. Approved for Zone 0/20 LED colors: red, amber, blue, green and clear 16-28vdc via Zener barrier or galvanic...

Floodlight approved forZon 2/22 Allowed room temperature -20°C ÷ +40°C IP66 Upon request: With power supply DIG dimmable with subcode 0041. With virtual midnight subcode 30. Power line carrier remote control systems subcode 0078.

Standard diameters from 10mm to 40mm (up to 80mm on request) Wire cross-sections from 0.08 up to 185mm² <li class="el-item"...

Approved for Zone 1/21  Dimension:  225 x 82 x 69mm Voltage: 230V Power output: 65W at 5°C Temperature class: T4 Protection class: IP 65 Temperature range: - 55°C up to +85°C

Approved for Zone 1/21 Explosion-proof and dustproof linear LED lighting Length 750mm SMC polyester plastic reinforced with fiberglass, color RAL 7038 4000K 5 year warranty Supplied with socket wrench, two Ex cable glands M25, two Ex blind plugs M25 and ceiling bracket in nickel-plated brass. ...

Zone 21, 2/22 &gt;70 000 hours L80B10 Ambient temperature -40°C till +45°C IP 66, IP 67 230V, 0/50-60Hz Certificate: ATEX, IECEx

Approved for Zone 1/21  Dimension:  630 x 300 x 40mm Voltage: 230V Power output: 500W at 5°C Temperature class: T4 Protection class: IP 65 Temperature range: - 55°C up to +85°C

- Zone 1/21 - Housing: aluminium powder painted casting - Diffuser: borosilicate glass, silicone gasket - Protected grid: AISI 316 - Standard version without protected grid On request - Protection grid - 110 V AC/DC - 48 V AC/DC

Approved for Zone 1/21  Dimension:  1030 x 420 x 40mm Voltage: 230V Power output: 1000W at 5°C Temperature class: T4 Protection class: IP 65 Temperature range: - 55°C up to +85°C

Zone 1/21 Ex classified emergency stop box Interlocked, reset by pulling out the emergency pressure again Cable gland M25 for cable 6-15 mm

Zone 1/21 Voltage: 250V AC     Switching contact: 1 NC 16A / 250V AC Switching temperature: 4°C On / 11°C Off (other swichting points s. operation manual) Power cable: 400mm 3G1,5mm²  Cable glands: M20x1,5 Messing vernickelt

Approved for Zone 1/21 Explosion-proof and dustproof linear LED lighting Length 1370mm SMC polyester plastic reinforced with fiberglass, color RAL 7038 4000K 5 year warranty Supplied with socket wrench, two Ex cable glands M25, two Ex blind plugs M25 and ceiling bracket in nickel-plated brass. ...

Ex control unit  Zone 1/21 2x pushbuttons and emergency STOP mushroom 1x M25 plastic CG at bottom side for cable 6-15mm <span lang="en-us" style="color:#1f497d;"...

Zone 1/21 Pushbutton box / control box Approved for Zone 1/21 2x pushbuttons (start, stop) PBT 01 - SPO 01/1 - SPO 01/2, 2x signal lamps SLP - 02/1 - SPO 02/2, 2x cable glands SPU 25 IP 66 IK 08 We supply various combinations of control boxes. Also customized solutions. Please see our data sheet...